To replace a Saniflo non-return valve, switch off and unplug the machine, drain and disconnect the discharge pipe, swap the old valve for a matching new one, reconnect, and test for leaks. Exact steps vary by model.
Safety first: switch the machine off at the fused spur and unplug it before removing any cover. If you are not confident working near mains electricity, ask a qualified engineer.
What causes it?
- When to do it – Replace the valve if water runs back into the unit after pumping, if the machine if the waste does not pump out
How to check it yourself
- Switch off at the fused spur, unplug and isolate the machine.
- Prepare for some water and have a cloth and container ready.
- Disconnect the discharge pipe as shown in your model’s instructions.
- Remove the old valve and note which way it faces.
- Fit the new valve the same way round and reconnect the pipe.
- Restore power and flush to test, checking for leaks.
The parts that fix it
Choose the right non-return valve
Parts are model specific, so match the part to the model name on your unit.
- Sanivite Non Return Valve
- Sanitop Non Return Valve
- Sanipro Non Return Valve
- Sanislim Non Return Valve
- Saniplus Non Return Valve
- Sanipack Non Return Valve
- Saniwall Macerator Non Return Valve
- Sanipro UP Non Return Valve
- Saniplus UP Non Return Valve
- Sanipack UP Non Return Valve
- Sanislim UP Non Return Valve
- Saniwall Pro UP Macerator Non Return Valve
- Sanibest Pro UP Non Return Valve
- Clapet anti-retour spécifique Non Return Valve
See all 18 non-return valves →
Not sure which part you need? Ask our engineer – tell us your model and what the machine is doing. You can also see our Saniflo repair prices.
Frequently asked questions
Can I do this myself?
Many owners do. Switch off and unplug first, and if you are not confident near mains electricity, ask a qualified engineer.
How do I know I have the right part?
Find the model name on your unit, choose the matching part above or ask our engineer send a photo.
Which way does the valve go?
Fit the new valve in the same direction as the old one. Photograph it before you remove it.
