How to Replace a Saniflo Non-Return Valve: Step by Step

To replace a Saniflo non-return valve, switch off and unplug the machine, drain and disconnect the discharge pipe, swap the old valve for a matching new one, reconnect, and test for leaks. Exact steps vary by model.

Safety first: switch the machine off at the fused spur and unplug it before removing any cover. If you are not confident working near mains electricity, ask a qualified engineer.

What causes it?

  • When to do it – Replace the valve if water runs back into the unit after pumping, if the machine if the waste does not pump out

How to check it yourself

  1. Switch off at the fused spur, unplug and isolate the machine.
  2. Prepare for some water and have a cloth and container ready.
  3. Disconnect the discharge pipe as shown in your model’s instructions.
  4. Remove the old valve and note which way it faces.
  5. Fit the new valve the same way round and reconnect the pipe.
  6. Restore power and flush to test, checking for leaks.

The parts that fix it

Choose the right non-return valve

Parts are model specific, so match the part to the model name on your unit.

See all 18 non-return valves →

Not sure which part you need? Ask our engineer – tell us your model and what the machine is doing. You can also see our Saniflo repair prices.

Frequently asked questions

Can I do this myself?

Many owners do. Switch off and unplug first, and if you are not confident near mains electricity, ask a qualified engineer.

How do I know I have the right part?

Find the model name on your unit, choose the matching part above or ask our engineer send a photo.

Which way does the valve go?

Fit the new valve in the same direction as the old one. Photograph it before you remove it.

Related Saniflo problems

Shopping Basket
Scroll to Top