Most Saniflo faults come down to four low-cost parts: the membrane, the microswitch, the capacitor and the non-return valve. Match what your machine is doing to the table below to find the part that fixes it.
How a Saniflo works
- Waste water flows into the unit and the water level rises.
- The rising level moves the membrane, which presses the microswitch.
- The microswitch starts the motor, and the capacitor helps the motor start turning.
- The blades macerate the waste and the pump pushes it out through the discharge pipe, with the non-return valve stopping it flowing back.
Symptom to part chart
| What is your Saniflo doing? | Most likely part | Full guide |
|---|---|---|
| Keeps running, will not switch off | Membrane, microswitch | Saniflo keeps running and will not switch off |
| Hums or buzzes but does not pump | Capacitor | Saniflo humming but not pumping |
| Will not start at all | Capacitor, microswitch, membrane | Saniflo will not start |
| Starts on its own | Microswitch, membrane, non-return valve | Saniflo starts on its own |
| Blocked or backing up | Descaler, non-return valve | Saniflo blocked and backing up |
| Smells | Descaler, non-return valve | Saniflo smells |
| Noisy or vibrating | Clear the blade; capacitor if humming | Saniflo noisy or vibrating |
Our Saniflo parts
- Membranes
- Microswitches
- Capacitors
- Non-return valves
- Descalers
- Flexible inlet adapters, blanking caps and membrane clips
Frequently asked questions
Which Saniflo part fails most often?
Membranes, microswitches and capacitors are the parts most often replaced, and each is far cheaper than a new machine.
Can I fit the part myself?
Many owners do. Always switch off and unplug first, and if you are not confident, ask a qualified engineer.
Not sure which part?
Ask our engineer with your model and the symptoms, or read the Saniflo FAQ.
